LORO-X Pellet Filling and Ventilation Lines

LORO-X Pellet Filling and Ventilation Lines PDF
Current issue 95 (PDF)

Wood pellets for pellet heating are delivered by tanker and blown directly into the storage room. For this purpose, filling and ventilation lines with coupling and sealing cover are required, which are routed through the outside wall of the house.

If the pellet storage room is not located directly on an outside wall, further lines must be used. For this application, LORO-X pipes, hot-dip galvanized, without internal coating (to ensure electrical conductivity up to the earthing clamp) with the push-in socket connection, which has been tried and tested a million times, are ideal.

LORO-X pipes can also be used as suction lines for transporting the pellets from the store to the boiler room.

Advantages

• dimensionally stable
• non-flammable
• pressure-resistant with LORO-X safety clamp

 

LORO-PELLET FILLING/VENTING PIPE WITH THREAD R 4
LORO-X Filling and ventilation bend DN 100, with thread R4, made of steel
DN 100
18350.100X
LORO-PELLET FILLING/VENTING BEND 45 DEG.
LORO-X Filling and ventilation bend DN 100, with thread R4, made of steel
DN 100
18351.100X
LORO-PELLET FIXED COUPLING WITH SEALING CAP, INTERNAL THREAD 4 INCH
LORO-X Fixed coupling with sealing cover, with thread Rp 4" made of aluminium (System Storz Type A-110)

18354.000X
LORO-PELLET VENTILATION COVER WITH FIXED COUPLING INCL. PLUG LOCK AND CHAIN
LORO-X Ventilation cover with fixed coupling, with thread Rp 4" made of aluminium (System Storz Type A-110)

18355.000X
LORO-PELLET GROUNDING CLAMP
LORO-X Earthing clamp

18357.000X
LORO-X PIPE WITH 1 SOCKET WITHOUT INTERNAL COATING 1000 MM DN 100
LORO-X Pipe with one socket, DN 100, without internal coating
l mm
 DN 100
1000
 01201.100O
2000 01101.100O
LORO-X pellet products
LORO-X Pipe with two sockets, DN 100, as adapter piece for cutting to length, without internal coating
DN 100
00120.100O
LORO-X BEND 45 DEGREES WITHOUT INTERNAL COATING DN 100
LORO-X Bend, without internal coating (90° bends must not be used.)
DN 100
00320.100O

Accessories

LORO-X ANCHOR CLIP DN 100
LORO-X Safety clamp, DN 100 against axial thrust and for pipe suspension
DN 100
00806.100X
LORO-X PIPE CLIP WITH COMBINATION THREAD M10/12, DN 100
LORO-X Pipe clamp, with connection thread M 10
DN 100
00975.100X
LORO-X PIPE CLIP WITH MOUNTING LUGS, DN 100
LORO-X Fastening clamp, for filling connector
DN 100
18980.100X
LORO-X SEALING ELEMENT DN 100
LORO-X Sealing element DN 100
DN 100
00911.100X
LORO-X LUBRICANT 250 G TUBE
LORO-X Lubricant 250 g tube
00986.000X