Rainwater downpipe Red.-Steck
without visible socket connections
LORO-X Red.-Steck downpipes without sealing element form a straight downpipe line in front of the façade without visible socket connections, particularly for external parapet drainage and suspended half-round or box gutters with gravity flow.
The transition from LORO-X steel drain pipe or from horizontal outlet pipes of LORO-X parapet drains is made, for example, with the LORO-X Red.-Steck connector. The LORO-X Red.-Steck downpipe is also suitable for connection to external titanium-zinc gutters. The transition to the gutter outlet can be made with the LORO-X connector with socket and reduced spigot end.
A downpipe line with a gradient of up to 10 degrees to the horizontal, or 180 mm/m, is classed as "vertical". As Red.-Steck connections are not backflow-proof, horizontal installation is not permitted.
Not only the high-quality hot-dip galvanized appearance but also its stability distinguishes it from simple titanium-zinc downpipes.
| LORO-X Red.-Steck rainwater downpipes, made of steel, without socket, with reduced insertion end, without seal for outdoor use on facade | |||
| l (mm) | DN 70 | DN 80 | DN 100 |
| 500 | 01121.070X | 01121.080X | 01121.100X |
| 1000 | 01202.070X | 01202.080X | 01202.100X |
| 1500 | 01102.070X | 01102.080X | 01102.100X |
| 2000 | 01103.070X | 01103.080X | 01103.100X |
| 3000 | 01104.070X | 01104.080X | 01104.100X |
LORO-X Red.-Steck Elbow
LORO-X Red.-Steck elbows with socket and reduced insertion end are used for the transition from LORO-X parapet drains (socket) to a Red.-Steck downpipe (reduced insertion end).
| LORO-X Elbow with socket and reduced insertion end | |||
| 87° | DN 70 | DN 80 | DN 100 |
| 500 | 03009.070X | 03009.080X | 03009.100X |
LORO-X Red.-Steck Elbow
| LORO-X Elbow without socket and reduced insertion end | |||
| 45° | DN 70 | DN 80 | DN 100 |
| 500 | 03208.070X | 03208.100X | |
LORO-X Red.-Steck End Cap
LORO-X Red.-Steck end caps fit into LORO-X Red.-Steck pipes without socket on the non-tapered side.
| LORO-X End caps for LORO-X Red.-Steck rainwater downpipes | |||
| DN 70 | DN 80 | DN 100 | |
| 500 | 08005.070X | 08005.100X | |
LORO-X Red.-Steck Connector
LORO-X Red.-Steck connectors with socket and reduced insertion end are used for the transition from LORO-X steel drain pipes or zinc sheet (socket) to a continuing LORO-X Red.-Steck downpipe (reduced insertion end).
| Connectors with socket and reduced insertion end | |||
| 45° | DN 70 | DN 80 | DN 100 |
| 500 | 08009.070X | 08009.100X | |
LORO-X Red.-Steck Branch
LORO-X Red.-Steck branches enable the watertight lateral introduction of a LORO-X steel drain pipe (socket) into a Red.-Steck downpipe (reduced insertion end) with the same nominal diameter.
| LORO-X Branches with socket and reduced insertion end | |||
| 87° | DN 70/70 | DN 80/80 | DN 100/100 |
| 500 | 02090.CC0X | 02090.MM0X | 02090.DD0X |
LORO-X Red.-Steck Red. Branch
LORO-X Red.-Steck reducing branches enable the watertight lateral introduction of a LORO-X steel drain pipe (socket) with a smaller nominal diameter into a Red.-Steck downpipe (reduced insertion end) with a larger nominal diameter.
| LORO-X Red. Branches with socket and reduced insertion end | |||
| 87° | DN 70/50 | DN 100/50 | DN 100/70 |
| 500 | 02095.CB0X | 02095.DB0X | 02095.DC0X |