LORO-X Balcony Drainage Series I with Bell
For balconies made of waterproof concrete, without additional covering
LORO-X balcony drains of series I are optimized for installation already at the concrete plant, so that the finished balcony slab is delivered to the construction site with the cast-in base body already in place. On site, only the strainer needs to be inserted and the downpipes mounted.
Two Drainage Levels
If an additional covering follows on site, such as tiles on tile supports, series I can be extended with a raised strainer receptacle to the upper drainage level. This provides high flexibility even with different balcony constructions.
Built-in Bell "Hides" the Socket Connection
Our series I includes drains with a built-in bell, so that the otherwise usual plastic formwork bell can be omitted. The socket is simply "hidden" between the inner and outer pipe of the drain within the concrete slab.
Vertical or Lateral Outlet
The base bodies of series I are available with vertical or lateral outlet pipes, so that the piping can run either within or below the concrete slab.
As Single and Direct Drain
Balcony drains of series I are available as single drains with stainless steel end strainer for upper balconies (vertical and lateral) or as direct drains with stainless steel ring strainer for direct pipe routing of the downpipe coming from above through lower balcony floors (vertical only).
Advantages
- Solid steel, hot-dip galvanized with additional coating
- Equipped with bell
- With horizontal outlet, the pipe is cast "invisibly" into the balcony slab
- Break-resistant up to 2 mm wall thickness and UV-resistant
- Proven quality: Use in precast concrete sector for over 50 years
- Standard availability of drains for slab thicknesses from 95-220 mm
- Custom manufacturing for intermediate lengths available on request
Material Properties
- Fire protection for DN 50-70/R90 or DN 100/R60 is tested and certified according to AbP No. P-MPA-E-09-010
- Structural stability in the LORO-X system under mechanical and physical stress
- Resistance to contact corrosion (e.g. with copper pipes), pitting or stress corrosion cracking, and contact with reinforcing steel
- Hot-dip galvanized steel offers increased protection against chloride exposure compared to conventional stainless steel in 1.4301
- Very good compatibility with alkaline and carbonated concrete
- High diffusion resistance to water vapor and oxygen
For Renovation
For renovation of balconies with core drilling, we recommend Series IK with additional clamping collar for optimal fixation of the drain body within the core drilling.
Application Examples Series I
LX Data Sheets Series I
The measured performance verification for balcony drainage
Series I Base Bodies
| LORO-X Balcony Direct Drains with Bell, Series I | ||||
| Slab Thickness | DN 50 | DN 70 | DN 100 | |
| 95 mm | 16375.050X | 16375.070X | ![]() |
|
| 120 mm | 16370.050X | 16370.070X | 16370.100X | |
| 140 mm | 16371.050X | 16371.070X | 16371.100X | |
| 160 mm | 16372.050X | 16372.070X | 16372.100X | |
| 180 mm |
16373.050X | 16373.070X | 16373.100X | |
| 200 mm | 16374.050X | 16374.070X | 16374.100X | |
| 220 mm | 16376.050X | 16376.070X | 16376.100X | |
| LORO-X Balcony Direct Drains with Bell, Lateral Outlet, Series I | |||
| Minimum Slab Thickness | DN 50 | DN 70 | |
| 120 mm | 16362.050X | ![]() |
|
| 140 mm | 16362.070X | ![]() |
|
LORO Attachment Element
| LORO Attachment Element, for Balcony Emergency Drainage | ||||
| Art. No. | DN 50 | DN 70 | DN 100 | |
| 16189.050X | 16189.070X | 16189.100X | ![]() |
|
Strainers
| Ring strainers stainless steel, for balcony storeys |
||||
| Art. No. | DN 50 | DN 70 | DN 100 | |
| 16193.050X | 16193.070X | 16193.100X | ![]() |
|
| Strainers Stainless Steel, for Upper Balconies |
||||
| Art. No. | DN 50 | DN 70 | DN 100 | |
| 16191.050X | 16191.070X | 16191.100X | ![]() |
|
| LORO-X Balcony Drain Strainer Unit | ||
| DN 70 | ||
| eccentric with mounting ring, for balcony storeys | 20428.070X | ![]() |
Accessories
| Strainer holder with strainer holes | ||||
| Art. No. | DN 50 | DN 70 | DN 100 | |
| 16195.050X | 16195.070X | 16195.100X | ![]() |
|
| LORO-X Strainer Holder, for balcony drains Series I, IK, G, GF and GS The LORO-X strainer holder for balcony drains of the Series I, IK, G, GF and GS is a high-quality alternative to standard plastic strainer holders. Both end strainers for single drains and ring strainers for direct drains can be used in the strainer holder. The circumferential collar as decorative trim enhances the balcony drainage at the second, visible drainage level. |
|||
| Art. No. | DN 70 | DN 100 | |
| made of stainless steel | 16190.070X | 16190.100X | ![]() |
| LORO Balcony Drain Cover Rosettes | ||||
| DN 050 | DN 070 | DN 100 | ![]() |
|
| with pass-through opening for pipe, material: stainless steel 1.4301, 1 mm thick | 16800.050X | 16800.070X | 16802.100X | |
| with pass-through opening for socket 2nd stage, material: stainless steel 1.4301, 1 mm thick outer pipe 250 mm long |
16801.050X | 16801.070X | 16803.100X | |








