LORO-X Pipes with 1 socket
The nominal length (l) of the pipes is specified without the socket length and can therefore be used for counting the pipes in an assembled state. Example: Nominal length 1000 mm + 70 mm socket = 1070 mm pipe outer dimension.
The flow capacity for gravity flow with gradient can be found here.
LORO-X Pipes with long socket (rainwater downpipe for balconies)
For length compensation during pipe installation between 2 fixed points, e.g. for already installed downpipes between balconies or offsets on roof terraces.
The total dimension of the pipe consists of the nominal dimension and the standard socket insertion depth. The remainder of the long socket serves for length compensation of the pipes during installation. Example DN70, 2500mm long: Total dimension 2555 mm - standard socket 55 mm = 2500 mm.
| LORO-X Pipes with long socket, for balcony drainage | |||||||||
| l (mm) | DN 32 | DN 40 | DN 50 | DN 70 | DN 80 | DN 100 | DN 125 | DN 150 | DN 200 |
| 2500 | 01002.050X | 01002.070X | 01002.100X | ||||||
| 2750 | 01003.050X | 01003.070X | 01003.100X | ||||||
LORO-X Pipes with long socket for main/emergency combination DN 50
With LORO-X pipes with long socket for main/emergency combination, the deviating pipe length dimension according to the dimensional drawing must be observed! In this version, the long socket is calculated completely in addition to the nominal dimension.
| LORO-X Pipe with long socket,made of steel, hot-dip galvanised, additionally coated inside,DN 50 |  | |
| l (mm) | DN 50 | |
| 500 | 01302.050X | |
| 1000 | 01203.050X | |
| 2000 | 01108.050X | |
Online calculation
This program calculates the required number of straight pipes.