LORO for AI assistants: ready-made links and MCP server
As a developer and producer of drains, pipes and fittings, LORO is able to provide customers with safe and reliable complete systems with measured and calculated performance verification. At the LOROWERK site in Bad Gandersheim, research, development, production, sales and service work hand in hand.
Provider: LOROWERK K.H.Vahlbrauk GmbH & Co.KG
This page explains to AI assistants, and to the people who use or set them up, how questions about LORO products are answered with ready-made links on www.loro.de: without setup (way 1) or via the MCP server at this address (way 2).
Deutsche Fassung: https://www.loro.de/mcp
Quick start: what can I do here?
Selection, calculation and tendering happen on www.loro.de, not in the chat. The assistant gives the user the matching link.
- Clarify the request: article, complete LX system, suitable drains, sizing, pipe connection, specification or contact person? Ask the user for missing details, do not assume them.
- Choose the way: with a connector, call the MCP tool from the table (way 2). Without a connector, build the link following the pattern in How to help your user (way 1).
- Pass on the link: in full, with one sentence on what the user does there. Take links from tool results unchanged.
- Add the notes: for sizing or selection: non-binding preliminary design, to be checked by the responsible planner. No prices; name the LORO contact person or the dealer instead.
| The user wants … | Link without connector | MCP tool |
|---|---|---|
| to find an article (term, article number, LX number) | item 1: search | search_products |
| data, data sheet, EAN or documents for an article | item 1: product page, item 3: product profile | get_product |
| a complete LX system with performance and parts list | item 2 | get_lx_system |
| CAD or BIM files | item 4 | get_cad_files |
| suitable drains by installation situation, selection and counting questions | item 5 | filter_drainage_systems (not search_products) |
| to connect another pipe system | item 6 | find_pipe_transition, find_pipes_fittings |
| to take articles into a bill of quantities | item 7 | build_tender_link |
| to size main and emergency drainage | item 8 | get_rainfall_intensity, build_calculation_link |
| a contact person, prices or a quotation | item 9 | find_sales_contact |
| a made-to-measure rectangular scupper | item 10 | none, link only |
Good to know:
- Counting: With
filter_drainage_systems,countis the number of drain variants as in the configurator,lx_system_countthe number of distinct LX systems. Iftruncated, raisemax_results(at most 25) or refine the filters. - Prices: For Germany,
find_sales_contactgives the contact person only with a 5-digit postcode. Without a postcode, ask for it first or name https://www.loro.de/en/contact or https://www.loro.de/kontakt. - Made-to-measure rectangular scupper: Ask the user for missing dimensions, above all the length L; the adjustable ranges are in item 10.
Two ways
Way 1: No setup needed
For every assistant, even without MCP support and without web access: it reads this page and writes prefilled links to www.loro.de. No setup and no access are needed.
The assistant can build these links directly, as long as the values come from the user or from loro.de:
- search, and the product page of a known article number (item 1);
- online configurator with preselection (item 5) and transitions with the listed pipe systems (item 6);
- specification with known article numbers (item 7);
- calculation via link with area, runoff coefficient and rainfall intensity (item 8);
- contact (item 9) and the VARIOFIT rectangular scupper configurator (item 10).
Do not build yourself: file names of CAD, BIM and data sheet files, and LX links with an unknown flange code. These links are on the product page; refer to it.
Way 2: MCP server for assistants with connector support
This address https://www.loro.de/mcp is also an MCP server (Model Context Protocol). It is read-only, quotes no prices and needs no sign-in. Use the address exactly like this: with www, with https and without a trailing slash. Other spellings are redirected, and some clients fail on that.
Setup in three steps (menu names change by vendor, plan and app version; with company accounts it is often only possible through the administrator):
- Add a custom connector (MCP server) in the assistant. Claude: Customize → Connectors → Add custom connector. ChatGPT: only in developer mode, which is not available in every plan; create a connector or app there.
- Enter a name, enter
https://www.loro.de/mcpas the address, sign-in or authentication: none (in Claude “No sign in”). - Switch the connector on in the chat and ask, e.g.: “Which LORO drains are there for a parapet, main drainage, free-surface flow, DN 100?”
Tools of the server (all read-only, no prices, no sign-in):
Caution: The arguments of the MCP server are English and are not named like the URL parameters of the links on this page (e.g. installation instead of entwaesserung, nominal_diameter instead of nennweite). Use only the names and values from this table or from tools/list. Other names do not act as filters: the server rejects unknown arguments and lists the valid names in the error message. Then repeat the call with those names. Also check count with filter_drainage_systems: without an effective filter, all drain variants are returned (currently 879).
| Tool | Purpose | Arguments (* = required) |
|---|---|---|
search_products | Searches articles and complete LX systems by text, article number, LX number, series or alternative term. | query* (text, 2–200 characters), series (text, e.g. 89), nominal_diameter (number), max_results (1–25) |
get_product | Returns the product details of an article (data, EAN, documents, CAD links, accessories), without price. | article_no* (text, e.g. 19041.000X) |
get_cad_files | Lists the available CAD and BIM files of an article or LX system as links. | article_no* (article or LX with flange), formats (list of pdf, dxf, dwg, step, ifc, rfa) |
get_lx_system | Returns performance, discharge curve, parts list and data sheet of an LX system with flange, and all drain variants if there are several drain articles. | lx_full* (text, e.g. LX772-4X) |
filter_drainage_systems | Filters LX systems like the online configurator, one row per drain variant; optionally with a required main and emergency flow. | installation (list of parapet, roof_vertical, roof_horizontal, balcony), drainage_type (list of main, emergency, combined), flow_type (list of gravity, siphonic), nominal_diameter (list of 40, 50, 70, 100, 125, 150), flange (list of whole numbers 1–99), max_engagement_depth_mm (0, 55, 92, 102 or 106), q_main_l_s, q_emergency_l_s (number in l/s), max_results (1–25) |
get_series | Lists the series or shows one series with its articles and LX systems. | series (text, e.g. 89; empty = all), max_results (1–50) |
find_pipe_transition | Finds the factory-maintained transition piece between two pipe systems. | from_system, to_system (names like LORO-X DN 100, Gussrohr DN 100; without them the list of names is returned) |
find_pipes_fittings | Searches pipes and fittings by product group, nominal diameter and length or angle. | at least one of: product_group (steel_drain_pipe, rain_standpipe, composite_pipe, pipe_fitting, sealing, special_parts, accessories), nominal_diameter (number), length_or_angle (number: above 90 = length in mm, otherwise angle in degrees); plus max_results (1–25) |
get_rainfall_intensity | Gives the KOSTRA-DWD-2020 rainfall intensities r5,5 and r5,100 (Germany only). | postcode (5 digits) or place, country (default DE) |
find_sales_contact | Gives the responsible LORO contact person or the country representation. | country (ISO code, default DE), postcode (required for DE) |
build_calculation_link | Builds the link to the online calculation. The server does not calculate; the page calculates when opened (item 8). | postcode (5 digits) or r5_5 and r5_100 (number in l/(s·ha)); areas (list of up to 30 partial areas, each area_m2* in m², runoff_coefficient (greater than 0 up to 1), roof_build_up (-, Warmdach, Kaltdach, Umkehrdach, WU-Beton), worth_protecting (true/false), facade_area_m2 in m²) |
build_tender_link | Builds a hand-over link to the online specification and resolves LX systems into single parts. | items* (list of 1–50, each article_no* (article or LX with flange) and quantity* (1–9999)) |
All tools except get_cad_files also take language (de or en; default is the language of the endpoint: /mcp = de, /en/mcp = en).
How link parameters and MCP arguments correspond:
| Link parameter | MCP argument |
|---|---|
entwaesserung = Attika, FlachdachSenkrecht, FlachdachWaagerecht, Balkon | installation = parapet, roof_vertical, roof_horizontal, balcony |
entwaesserungsart = 1, 2, 3 | drainage_type = main, emergency, combined |
stroemungsart = Freispiegel, Druck | flow_type = gravity, siphonic |
nennweite | nominal_diameter |
kostra_plz, r55, r5100 | postcode, r5_5, r5_100 |
a_N, c_N, dachaufbau_N, schutz_N (1/0), fassadenflaeche_N | in areas: area_m2, runoff_coefficient, roof_build_up, worth_protecting (true/false), facade_area_m2 |
The roof build-up tile of the configurator (dachaufbau) has no MCP argument; use flange instead.
The results contain the matching links on www.loro.de, e.g. product_url, datasheet_pdf, configurator_url or url. Pass these links on unchanged, do not build them yourself.
Example arguments
filter_drainage_systems, parapet, main drainage, free-surface flow, DN 100:
{"installation":["parapet"],"drainage_type":["main"],"flow_type":["gravity"],"nominal_diameter":[100],"max_results":25}
Response (as of 29.10.2026): count 31 drain variants from lx_system_count 27 LX systems, of which returned 25 rows, truncated true, plus configurator_url with the same preselection. If truncated, refine the filters (e.g. flange) or pass on the configurator_url.
build_calculation_link, 450 m² gravel roof, warm roof, postcode 31061 (coefficient and roof build-up after asking the user):
{"postcode":"31061","areas":[{"area_m2":450,"runoff_coefficient":0.8,"roof_build_up":"Warmdach"}]}
Response: url = https://www.loro.de/service/online-berechnung/flachdachentwaesserung?kostra_plz=31061&a_1=450&c_1=0.8&dachaufbau_1=Warmdach. The page calculates immediately when opened; give this link to the user. With language en the server converts the postcode into r55 and r5100 itself, because the postcode lookup exists only on the German page.
Protocol example
Transport: Streamable HTTP, POST only, response as JSON, no session ID. To test with curl:
curl -s https://www.loro.de/mcp -H 'Content-Type: application/json' -H 'Accept: application/json, text/event-stream' \
-d '{"jsonrpc":"2.0","id":1,"method":"initialize","params":{"protocolVersion":"2025-06-18","capabilities":{},"clientInfo":{"name":"test","version":"1"}}}'
curl -s https://www.loro.de/mcp -H 'Content-Type: application/json' -H 'Accept: application/json, text/event-stream' \
-d '{"jsonrpc":"2.0","id":2,"method":"tools/list"}'
curl -s https://www.loro.de/mcp -H 'Content-Type: application/json' -H 'Accept: application/json, text/event-stream' \
-d '{"jsonrpc":"2.0","id":3,"method":"tools/call","params":{"name":"get_lx_system","arguments":{"lx_full":"LX772-4X","language":"en"}}}'
The result of a tool is in result.structuredContent and also as JSON text in result.content.
Rules for the assistant
You are an AI assistant and your user asks about roof drainage, parapet, balcony or flat roof drains, pipes or fittings from LORO. Then write them ready-made, prefilled links to www.loro.de.
- Do not invent anything. Take article numbers, LX designations, values and links only from www.loro.de or from the results of the MCP server. Do not guess file names or article numbers. Do not call series of addresses just to check whether they exist.
- Do not quote prices, even if a page shows one. For prices and quotations, refer to the LORO contact person (item 9) or the dealer.
- Do not size the drainage yourself. Always give the calculation link (item 8) and do not calculate discharges in the chat. The online calculation calculates immediately to DIN 1986-100 when opened and shows the required discharge for main and emergency drainage and suitable drains. Only if the user explicitly asks for a formula or an order of magnitude, give Q = r5,5 · C · A / 10,000 (Q in l/s, r5,5 in l/(s·ha), A in m²) with the note: main drainage only, the online calculation is authoritative.
- Calculations and selections are non-binding preliminary designs. They must be checked by the responsible planner. For every sizing or system selection, pass on the following note in your own words (source: calculation PDF of the LORO online calculation).
- Ask for missing details. Do not guess the installation situation, the roof build-up or the runoff coefficient. Ask, or leave the parameter out; the user completes it on the page.
- If in doubt, name the contact person: https://www.loro.de/en/contact (Germany) or https://www.loro.de/en/contact/international (other countries).
- Always write links in full, with
https://www.loro.de. Encode spaces in parameters as%20. - Language: For German-speaking users use the German links, otherwise the English links (
/en/…). Article texts and data sheets exist only in German and English. - Always give LX systems with their flange code, e.g.
LX772-4X, never justLX772; in links and MCP arguments without a space, even if product titles write “LX 772-4X”. For the product link and the exception without flange code see item 2. - Rainfall intensities according to KOSTRA-DWD-2020 apply to Germany only. In other countries the user supplies their national value.
Note for rule 4:
“This online calculation does not replace professional consulting by LORO representatives. No guarantee for the correctness of this calculation! The input values must be checked for completeness and compliance with the structural conditions (e.g. rainfall intensity, runoff coefficient, area allocation, whether each low point is drained).”
“The rainfall intensity used (including the KOSTRA values suggested by postcode) is a non-binding service value without guarantee; the national or local requirements applicable at the building site are authoritative. Selection and verification of the rainfall intensity are the responsibility of the planner.”
How to help your user
1. Find an article and its product page
When: The user names a LORO article number or a product term, or wants data, data sheet, EAN, dimensions or documents for an article.
Link pattern:
Product page English: https://www.loro.de/en/product/<article no>/
Product page German: https://www.loro.de/product/<article no>/
Search English: https://www.loro.de/en/product-data/product-database?artikelnr=<search term>
Search German: https://www.loro.de/produktdaten/produktdatenbank?artikelnr=<search term>
<article no>: LORO article number in capital letters, e.g.19041.000X,00100.040X,B0480.002X.- The search accepts article numbers, LX numbers and terms (the parameter is still called
artikelnr). The result list links to the product pages.
On the product page: technical data, EAN, ETIM class, dimensions, material, long text or specification text, documents (data sheet, dimensioned drawing, installation instructions), CAD and BIM links and product profile PDF.
Examples:
- https://www.loro.de/en/product/19041.000X/ (LORO-X rectangular scupper 300 x 100)
- https://www.loro.de/product/19041.000X/
- https://www.loro.de/en/product-data/product-database?artikelnr=rectangular%20scupper
2. Complete LX system with flange and quantity
When: The subject is a whole drain system (drain with all parts) or the user names an LX number.
Link pattern:
https://www.loro.de/en/product/LX<nr>-<flange>X/?AnzahlSysteme=<quantity>
Exception without flange code (currently only LX1390): https://www.loro.de/en/product/LX1390/
<nr>: LX number;<flange>: flange code, e.g.4inLX772-4X.- Where does the flange code come from? From the LX designation on loro.de: on the cards of the online configurator (item 5), on the LX page under “Alternative flanges” and in the LX data sheet; with a connector from
lx_fullorflange. Do not guess the code. - Product link: with a connector, always take
product_urlfrom the result. The pattern above is only the fallback. A system without flange code is calledLX1390-0Xin the configurator and in the MCP, but its product page is https://www.loro.de/en/product/LX1390/ (the address/en/product/LX1390-0X/does not exist). AnzahlSysteme: whole number 1–999, optional. It prefills the quantity field of the system card.- Data sheet:
https://www.loro.de/fileadmin/PDF/LX_Datenbl<nr>_Gesamt_ENG.pdf(German…_Gesamt.pdf). Not every LX number has one, so take the link from the page.
System and drain variant: An LX system is LX number plus flange, e.g. LX1904-1X. Some systems exist with several drain articles, the drain variants (e.g. LX1904-1X with 2, LX1390-0X with 4). The online configurator shows every drain variant as its own card and counts it as a “system”; the same LX designation can therefore appear several times. The MCP server returns drain_article_no per row (filter_drainage_systems) or variant_count and drain_variants (get_lx_system). When you give a number, say whether LX systems or drain variants are meant.
On the LX page: at the top the drain article of the system with its specification text, below it the “Complete System” box with the system text, the parts list and the button “Add to Basket” (on the German page “in Ausschreibung”); it takes over all parts × quantity into the online specification, see item 7.
Examples:
- https://www.loro.de/en/product/LX772-4X/ (parts list with 15 parts)
- https://www.loro.de/en/product/LX772-4X/?AnzahlSysteme=4
- https://www.loro.de/en/product/LX1390/ (system without flange code with 4 drain variants)
3. Product profile PDF
When: The user wants a compact product data sheet to pass on.
Link pattern:
https://www.loro.de/fileadmin/php/produktdatenbank/steckbrief.php?artikelnr=<article no>&lang=<0|1>
lang=0 is German, lang=1 is English. The product profile never contains a price.
Example: https://www.loro.de/fileadmin/php/produktdatenbank/steckbrief.php?artikelnr=19041.000X&lang=1
4. CAD and BIM files
When: The user needs a PDF dimensioned drawing, DXF, DWG, STEP, IFC or Revit RFA.
The available files are on the product page (item 1); with a connector, get_cad_files lists them as links. Not every file exists for every article. Take the links and do not guess file names.
Examples (files exist):
- https://www.loro.de/fileadmin/CAD/19041.000X_2D.dxf
- https://www.loro.de/fileadmin/BIM/LORO/IFC3/19041.000X_3D.ifc
5. Online configurator with prefilled values
When: The user is looking for suitable drains by installation situation, drainage type, flow type, nominal diameter or roof build-up. The page shows the results immediately (at most 30 cards, the total is shown above them). The user chooses flange and engagement depth on the page.
Link pattern:
English: https://www.loro.de/en/service/online-configurator/flat-roof-drainage?entwaesserung=…&entwaesserungsart=…&stroemungsart=…&nennweite=…&dachaufbau=…
German: https://www.loro.de/service/online-konfigurator/flachdachentwaesserung?… (same parameters)
| Parameter | allowed values | Meaning |
|---|---|---|
entwaesserung | Attika, FlachdachSenkrecht, FlachdachWaagerecht, Balkon | installation situation (parapet, flat roof vertical, flat roof horizontal, balcony) |
entwaesserungsart | 1, 2, 3 | 1 = main drainage, 2 = emergency drainage, 3 = combined main and emergency |
stroemungsart | Freispiegel, Druck | free-surface flow or pressure flow |
nennweite | 40, 50, 70, 100, 125, 150 | DN in mm |
dachaufbau | BetonKaltdach, BetonWarmdach, BetonUmkehrdach, TrapezKaltdach, TrapezWarmdach, Kastenrinne, WUBeton | selects the roof build-up tile (concrete cold, warm or inverted roof; trapezoidal cold or warm roof; box gutter; waterproof concrete); sets the installation situation (roof and parapet) and suitable flanges |
- Separate several values per parameter with a comma, e.g.
nennweite=70,100. Unknown values are ignored. dachaufbaucan be combined withentwaesserungsart,stroemungsartandnennweite.- The number of results counts drain variants, not LX systems (item 2). It changes with the product range; give it at most as “currently”.
Examples:
- Parapet, main drainage, free-surface flow, DN 100: https://www.loro.de/en/service/online-configurator/flat-roof-drainage?entwaesserung=Attika&entwaesserungsart=1&stroemungsart=Freispiegel&nennweite=100
- Concrete warm roof, emergency drainage, DN 100: https://www.loro.de/en/service/online-configurator/flat-roof-drainage?dachaufbau=BetonWarmdach&entwaesserungsart=2&nennweite=100
6. Transitions between pipe systems
When: The user wants to connect LORO-X to another pipe system (cast iron, KA, PE, ST) or change the nominal diameter. Only connections maintained by the factory are shown.
Link pattern (German page only):
https://www.loro.de/service/online-konfigurator/uebergaenge?UebergangVon=<system>&UebergangAn=<system>
- Valid values for
UebergangVonandUebergangAn, written exactly like this (spaces as%20):LORO-X DN 32|40|50|70|80|100|125|150|200,Gussrohr DN 50|70|80|100|125|150|200(cast iron pipe),KA-Rohr DN 50|70|100|125|150|200,KA-Rohr Form 2 DN 125|200|250,PE-Rohr DN 50(PE pipe),ST-Rohr DN 100|125|150|200(steel pipe). - Not every combination exists. Without
UebergangAnthe page shows all targets forUebergangVon.
Example: LORO-X DN 100 to cast iron pipe DN 100 (fitting 00630.100X): https://www.loro.de/service/online-konfigurator/uebergaenge?UebergangVon=LORO-X%20DN%20100&UebergangAn=Gussrohr%20DN%20100
7. Specification
When: The user wants to take articles into a bill of quantities (BoQ) and create e.g. GAEB, ÖNORM, PDF or Excel from it.
Keep two things apart: the specification text of an LX system is in the “Complete System” box of the LX product page (item 2), for reading and copying. Taking over items is done by the button “Add to Basket”, the hand-over link and build_tender_link; in the online specification every single article is then its own item with quantity and its article text, there is no combined text for the system.
Three ways take over items:
| Way | takes over |
|---|---|
| LX page, button “Add to Basket” (German page: “in Ausschreibung”) in the “Complete System” box (item 2) | all parts of the parts list × AnzahlSysteme |
hand-over link WKPlusArtikel… (below) | single articles only; resolve LX systems into parts first |
MCP tool build_tender_link | builds this hand-over link and resolves LX systems itself (quantity × number, identical parts added up) |
Link pattern:
English: https://www.loro.de/en/service/online-specification?WKPlusArtikel1=<article no>&WKPlusArtikelMenge1=<quantity>&WKPlusArtikel2=<article no>&WKPlusArtikelMenge2=<quantity>…
German: https://www.loro.de/service/online-ausschreibung?… (same parameters)
- Items 1 to 50 (
WKPlusArtikel1…WKPlusArtikel50, each withWKPlusArtikelMenge<n>). - Article number: capital letters, digits, period, hyphen, at most 50 characters. Quantity: whole number from 1; if missing or 0, 1 applies.
- The hand-over link is a browser process: when opened, the page takes the articles into the user's session (session cookie) and redirects with status 303 to the online specification without parameters; the articles are then in the first parts list. It therefore only works in the user's browser. A request via curl or fetch without a cookie does not show the articles and is not suitable for checking.
- LORO creates a new BoQ only when the user saves there; if the session already has a saved BoQ, the articles are added to it. The user can export afterwards on that page.
- An LX designation in the link would be taken over as an unknown item. Without a connector: take the parts list from the LX page, multiply each quantity by the number of systems, add up identical parts. Usually easier: the link from item 2 with
?AnzahlSysteme=<n>and the button “Add to Basket”.
Examples:
- 2 × LORO-X rectangular scupper 19041.000X: https://www.loro.de/en/service/online-specification?WKPlusArtikel1=19041.000X&WKPlusArtikelMenge1=2
- 4 × LX772-4X, resolved into 15 parts:
https://www.loro.de/en/service/online-specification?WKPlusArtikel1=13506.100X&WKPlusArtikelMenge1=4&WKPlusArtikel2=01385.000X&WKPlusArtikelMenge2=4&WKPlusArtikel3=01201.100X&WKPlusArtikelMenge3=8&WKPlusArtikel4=01203.050X&WKPlusArtikelMenge4=8&WKPlusArtikel5=13217.100X&WKPlusArtikelMenge5=4&WKPlusArtikel6=13500.100X&WKPlusArtikelMenge6=4&WKPlusArtikel7=01101.100X&WKPlusArtikelMenge7=4&WKPlusArtikel8=01108.050X&WKPlusArtikelMenge8=4&WKPlusArtikel9=13510.100X&WKPlusArtikelMenge9=4&WKPlusArtikel10=00911.100X&WKPlusArtikelMenge10=24&WKPlusArtikel11=00911.050X&WKPlusArtikelMenge11=20&WKPlusArtikel12=00975.100X&WKPlusArtikelMenge12=12&WKPlusArtikel13=00986.000X&WKPlusArtikelMenge13=4&WKPlusArtikel14=09604.200X&WKPlusArtikelMenge14=12&WKPlusArtikel15=13235.100X&WKPlusArtikelMenge15=4
8. Online calculation of flat roof drainage (DIN 1986-100)
When: The user wants to size the main and emergency drainage of a roof area.
A link with at least one partial area (a_1) opens the finished calculation: the page prefills the form, calculates immediately to DIN 1986-100 and shows the required discharge for main and emergency drainage, drain suggestions and warnings. The user checks the values there, creates the PDF or adds drains to the specification. Like every calculation, it is saved under the user's LVID and LV-Pass. Do not calculate yourself (rule 3).
Finished calculation via link
English: https://www.loro.de/en/service/online-calculation/flat-roof-drainage?r55=<r5,5>&r5100=<r5,100>&a_1=<m²>&c_1=<coefficient>&dachaufbau_1=<build-up>
German: https://www.loro.de/service/online-berechnung/flachdachentwaesserung?kostra_plz=<postcode>&a_1=<m²>&c_1=<coefficient>&dachaufbau_1=<build-up>
Project parameters:
| Parameter | allowed values | Unit |
|---|---|---|
kostra_plz | 5-digit German postcode; sets r5,5 and r5,100 from KOSTRA-DWD-2020 and takes precedence over r55/r5100. Only on the German page (the other language pages only show a note), so on the English page use r55 and r5100 | – |
r55 | number > 0 (normal rainfall intensity r5,5) | l/(s·ha) |
r5100 | number > 0 (100-year rainfall intensity r5,100) | l/(s·ha) |
Parameters per partial area (N = 1 to 30; several areas with a_2, c_2 etc.):
| Parameter | allowed values | Unit |
|---|---|---|
a_N | roof area, number > 0 | m² |
c_N | runoff coefficient, values see below; another number > 0 up to 1 is taken as a manual coefficient | – |
dachaufbau_N | Warmdach (warm roof), Kaltdach (cold roof), Umkehrdach (inverted roof), WU-Beton (watertight concrete), or - | – |
schutz_N | 1 = particularly worth protecting (emergency drainage with the full r5,100), 0 = no | – |
fassadenflaeche_N | adjoining facade area, number ≥ 0 | m² |
Runoff coefficient c_N, as labelled in the form:
c_N | label in the form |
|---|---|
1 | Smooth surface |
0.9 | Paving slabs on gravel |
0.8 | Gravel roof |
0.7 | Slope over 5° extensive green roof |
0.5 | Slope under 5° extensive green roof under 10 cm |
0.4 | Slope under 5° extensive green roof 10–30 cm |
0.2 | Slope under 5° intensive green roof over 30 cm |
How to map the user's details:
- Surface (gravel, paving, green roof) belongs in
c_N. If the user only says “gravel”, ask: “Gravel roof (0.8) or paving slabs on gravel (0.9)?” Do not suggest other coefficients. - Roof build-up (
dachaufbau_N) is the construction: warm roof, cold roof, inverted roof or watertight concrete. The page filters the drain suggestions by it. If it is missing, ask for it. - Without an answer: leave the parameter out; the user chooses in the form. Fields not given keep the tool defaults (coefficient: smooth surface, 1) or the state of the user's session. If you still set a value, e.g. “Gravel roof”, then only as an assumption that you state explicitly to the user.
There are further, rarely needed parameters (safety margin; per partial area retention, water heights, choice and quantity of drains); they correspond to the fields of the form, see there.
Notes:
- Numbers with a period or comma, without thousands separators and without sign.
- Invalid values are not applied; the page names the parameter and the rule.
- Free texts (project, designation, comment, e-mail) are not possible via link.
Examples:
- KOSTRA values of 31061 Alfeld and one partial area (450 m², gravel roof, warm roof): https://www.loro.de/en/service/online-calculation/flat-roof-drainage?r55=370&r5100=696.7&a_1=450&c_1=0.8&dachaufbau_1=Warmdach
- Two partial areas with the KOSTRA values of 80331 München, the first particularly worth protecting, the second with facade area: https://www.loro.de/en/service/online-calculation/flat-roof-drainage?r55=356.7&r5100=636.7&a_1=900&c_1=0.4&schutz_1=1&a_2=300&c_2=1&fassadenflaeche_2=120
Prefill only the rainfall intensity
With only kostra_plz, or r55 and r5100, the page fills the two rainfall intensity fields and does not calculate yet; the user enters areas, runoff coefficient and roof build-up on the page. Use rainfall intensities only if the user gives them or they come from loro.de (unit l/(s·ha), decimal point).
- KOSTRA values for 30159 Hannover: https://www.loro.de/en/service/online-calculation/flat-roof-drainage?r55=330&r5100=603.3
- by postcode (German page only): https://www.loro.de/service/online-berechnung/flachdachentwaesserung?kostra_plz=80331
- without prefilled values: https://www.loro.de/en/service/online-calculation/flat-roof-drainage. The German page has a postcode search for the KOSTRA values there.
9. Contact persons
- Germany: https://www.loro.de/en/contact or https://www.loro.de/kontakt. There the user finds the field and office sales contacts by postcode.
- Other countries: https://www.loro.de/en/contact/international or https://www.loro.de/kontakt/international. On the language versions of loro.de, a box also names the responsible country representative.
- Prices and quotations are available from the contact person or the dealer, not from this page.
10. Made-to-measure rectangular scupper (VARIOFIT)
When: The user needs a rectangular scupper in a custom size instead of a catalogue article.
Link:
- English: https://www.loro.de/en/service/online-configurator/rectangular-scupper
- German: https://www.loro.de/service/online-konfigurator/rechteckspeier
On the page the user sets the dimensions, sees the scupper in the 3D view and creates a PDF for the request for quotation. The preview is non-binding; it is checked and approved by LORO.
| Dimension in the configurator | Meaning | currently adjustable |
|---|---|---|
| Scupper width B | width of the scupper cross-section | 50–800 mm |
| Height H | height of the scupper cross-section | 40–200 mm |
| Length L | length of the scupper | 113–1200 mm |
| Bonding flange (all round) | width of the bonding flange, the same on all sides | 40–200 mm |
| Bevel cut angle | angle of the cut, 90° = straight cut | 45–90° |
- Sizes like “250 x 80” are the cross-section width × height, as with the catalogue scuppers (e.g. 19041.000X “300 x 100”): B = 250 mm, H = 80 mm. Ask for the length L separately.
- Not every combination is possible, e.g. a length that is too short for the selected height and bevel cut angle; the configurator reports this. The ranges may change; the configurator is authoritative.
- The link has no parameters; the user enters the dimensions on the page. The MCP server does not know this configurator. Catalogue rectangular scuppers can be found with the search (item 1).
What this service cannot do
- No prices, no quotations, no orders, no delivery dates or stock levels. Instead: LORO contact person (item 9) or dealer.
- No binding sizing or planning. The MCP server does not calculate; it builds links to the online calculation. Its result is a non-binding preliminary design, to be checked by the responsible planner.
- No access to customer data: no sign-in, no saved bills of quantities, calculations or orders.
- Nothing is created in advance. Specification and calculation are only created on www.loro.de when the user opens the link.
- German and English only for article texts and data sheets; KOSTRA rainfall intensities for Germany only.
- Not in the MCP server: the VARIOFIT rectangular scupper configurator (item 10), link only.
- No substitute for consulting by LORO representatives.
Examples
The links in these examples were retrieved on 29.10.2026 (HTTP 200, expected content present). The example dialogues are translated from the German page; German-language links are replaced by the English ones where an English page exists.
Example 1: Spare part in the trade
User: “A customer needs a replacement for a LORO rectangular scupper 300 × 100. Is there a data sheet and CAD for it?”
Assistant: “That is the LORO-X rectangular scupper 300 x 100 with adhesive flange made of stainless steel 1.4301, article number 19041.000X. On the product page you will find technical data, EAN, the data sheet, the product profile PDF and the CAD files (DXF, DWG, STEP, IFC): https://www.loro.de/en/product/19041.000X/
If a different size is needed, a made-to-measure VARIOFIT rectangular scupper can be configured: https://www.loro.de/en/service/online-configurator/rectangular-scupper
Prices are available from your LORO contact person or the dealer.”
Example 2: Parapet main drainage
User: “Which LORO drains are there for a parapet, main drainage, free-surface flow, DN 100?”
Assistant: “With this preselection the LORO configurator shows the matching systems: https://www.loro.de/en/service/online-configurator/flat-roof-drainage?entwaesserung=Attika&entwaesserungsart=1&stroemungsart=Freispiegel&nennweite=100
It counts every drain variant separately, so some LX systems appear more than once. There you can filter further by flange and engagement depth. The selection is a non-binding preselection and must be checked by the responsible planner.”
Example 3: Emergency drainage on a concrete roof
User: “Flat roof, concrete slab with warm roof. I need emergency drainage DN 100.”
Assistant: “Here is the configurator with roof build-up ‘concrete, warm roof’, emergency drainage and DN 100: https://www.loro.de/en/service/online-configurator/flat-roof-drainage?dachaufbau=BetonWarmdach&entwaesserungsart=2&nennweite=100
You can size the required discharge with the online calculation: https://www.loro.de/en/service/online-calculation/flat-roof-drainage. The result is a non-binding preliminary design.”
Example 4: Sizing with gravel (ask first)
User: “Flat roof of 450 m² with gravel, site 31061 Alfeld. How much discharge do I need?”
Assistant: “I need two more details: is it a gravel roof (runoff coefficient 0.8) or paving slabs on gravel (0.9)? And which roof build-up: warm roof, cold roof, inverted roof or watertight concrete?”
User: “Gravel roof, warm roof.”
Assistant: “The LORO online calculation calculates this to DIN 1986-100 immediately when you open this link, with the KOSTRA rainfall intensities for 31061 (r5,5 = 370, r5,100 = 696.7 l/(s·ha)): https://www.loro.de/en/service/online-calculation/flat-roof-drainage?r55=370&r5100=696.7&a_1=450&c_1=0.8&dachaufbau_1=Warmdach
There you see the required discharge for main and emergency drainage and suitable drains. The result is a non-binding preliminary design, to be checked by the responsible planner.”
(Without an answer: give the link without
c_1anddachaufbau_1and say that the user chooses coefficient and roof build-up in the form.)
Example 5: Complete system into the specification
User: “I need the system LX772-4X four times in the bill of quantities.”
Assistant: “On this page the number of systems is already set to 4: https://www.loro.de/en/product/LX772-4X/?AnzahlSysteme=4
With “Add to Basket” in the “Complete System” box the page takes over all 15 single parts, each with four times the quantity. In the online specification you can then create GAEB, ÖNORM, PDF or Excel.”
Example 6: Connection to KA pipe
User: “How do I connect a KA pipe DN 100 to LORO-X DN 100?”
Assistant: “For this LORO offers the transition piece 00750.100X with the sealing element 00933.100X: https://www.loro.de/service/online-konfigurator/uebergaenge?UebergangVon=KA-Rohr%20DN%20100&UebergangAn=LORO-X%20DN%20100 (German-language page)
For questions on the installation situation your LORO contact person will help.”