Wood pellets for pellet heating are delivered by tanker and blown directly into the storage room. For this purpose, filling and ventilation lines with coupling and sealing cover are required, which are routed through the outside wall of the house.
If the pellet storage room is not located directly on an outside wall, further lines must be used. For this application, LORO-X pipes, hot-dip galvanized, without internal coating (to ensure electrical conductivity up to the earthing clamp) with the push-in socket connection, which has been tried and tested a million times, are ideal.
LORO-X pipes can also be used as suction lines for transporting the pellets from the store to the boiler room.
• dimensionally stable
• Pressure-resistant with LORO-X safety clamp
|LORO-X Filling- and ventilation pipe DN 100, with thread R4|
|LORO-X Filling- and ventilation bend DN 100, with thread R4|
|LORO-X Steady coupling with cover plate with thread Rp 4", made of aluminium (system Storz type A-110)|
|LORO-X Ventilation cover with fixed coupling with thread Rp 4", made of aluminium (system Storz type A-110)|
|LORO-X Grounding clamp|
|LORO-X Pipes with 2 sockets, DN 100 the cut pipes can be used as two pipes with one socket without internal coating|
|LORO-X Bends, 45°Bends 90° are forbidden to be used|
|LORO-X Anchor clip, DN 100 against axial thrust and for pipe mounting|
|LORO-X Pipe clip with connection thread M 10|
|LORO-X Fastening clip for filling connector|
|LORO-X Sealing element, DN 100|
|LORO-X Lubricant, 250 g-Tube|