LORO-X Base de datos de productos online

No se encontraron resultados exactos

Su búsqueda de "17137.125A" no produjo resultados.

Números de artículo similares:

17117.125A
LORO-ETAGENE.ALU MAX.AUFBAU 18

17132.125A
LORO-DACHABL.ALU,2-TLG,O.WD.,3

17110.125A
LORO-DACHABL.ALU,1TLG,O.WD.SEN

17115.125A
LORO-DACHABLAUFTO. ALU,O.WD,SE

17120.125A
LORO-DACHABL.ALU,2TLG,O.WD.SEN

17127.125X
LORO-SIEBEINHEIT SR.O,NOT.DN 1

17141.125A
LORO-DACHABL.ALU,1TLG,M.WD.SEN

17142.125A
LORO-DACHABL.ALU,2TLG,M.WD.SEN

Consejos de búsqueda:

Los números S con la letra inicial S corresponden a piezas especiales por encargo. Póngase en contacto con nosotros personalmente: Contacto
Compruebe si hay cifras intercambiadas en el número de artículo
Busque el diámetro nominal con un espacio: DN 100 en lugar de DN100
Tubo por metro lineal: p. ej. DN 100 MISCHPREIS

O buscar por etiquetas:

Staffelgeschoss Retention Kaskade Flachdach

O por propiedades:

45 Grad Aufkantung 90 Grad Aufkantung mit Anschlussmanschette einteilig zweiteilig Sanierungsablauf WU-Beton Anschlussstück Schiebeflansch Brandschutzablauf Dämmblock mit Heizung Freispiegelströmung Druckströmung Hauptentwässerung Notentwässerung

Búsqueda de texto completo en páginas web y PDFs:

Páginas

—

PDFs

LIEFERPROGRAMM.pdf
AUFBAUSCHEMA_SERIE_O_DN100_DN125.pdf
UEBERSICHT_ANSCHLUSSMANSCHETTEN.pdf
FLACHDACHENTWAESSERUNG.pdf
VL_LFL_ATTIKASTAR_DRUCK_ENG.pdf
AKTUELL_89.pdf
AKTUELL_79.pdf
VERLEG_LFL_RS_ATT_NE.pdf
ZERT_LGA_DACH_BALKON.pdf
SerO_Balkon_Heizung_A.pdf

Artículos buscados recientemente:

LORO-X Buscador rápido de tubos y accesorios

Grupo de productos:

TodosTubo de desagüe de aceroTubo de base pluvialTubo compuestoTubo/AccesorioSelladoPiezas especialesAccesorios

Diámetro nominal:

TodosDN 0DN 32DN 40DN 50DN 70DN 80DN 100DN 125DN 150DN 168DN 200DN 250DN 300

Longitud/Grado:

Todossin indicar15°30°45°70°87°88°90°150 mm170 mm250 mm350 mm400 mm500 mm750 mm1000 mm1500 mm2000 mm2500 mm2750 mm2950 mm3000 mm4000 mm5000 mm6000 mm

2091 Resultados

LORO-X Wandeinbaukasten, aus Edelstahl, verzinktem Stahlblech, mit Füllstutzen DN 50 einschl. Füllrohrverschluss mit Bajonetverschluss, mit Bohrung zur Aufnahme des Grenzwertgeber-Anschlusssteckers, mit Kabelschutzrohr für Elektrokabel, mit verschließbarer Tür (Vierkant-Steckschlüssel), mit Schrauben, Bolzen, und Laschen zum Einspannen ins Mauerwerk, mit Maueranschlussdichtung am Rahmen, DN 50

00741.050X
LORO-X Wandeinbaukasten aus Edelstahl mit Füllstutzen DN 50

00985.000X
LORO-X Kleber (125 ccm)

00986.000X
LORO-X Gleitmittel 250-Gramm Tube

LORO-X Hakenschlüssel für Balkonabläufe Serie J

09068.000X
LORO-X Hakenschlüssel Balkonablauf SERIE J

LORO-X Gewindestift M 8, aus Stahl, feuerverzinkt, 60 mm lang

09601.060X
LORO-Gewindestift M 8 X 60 mm

LORO-X Gewindestift M 8, aus Stahl, feuerverzinkt, 80 mm lang

09601.080X
LORO-Gewindestift M 8 X 80 mm

LORO-X Gewindestift M 8, aus Stahl, feuerverzinkt, 100 mm lang

09601.100X
LORO-Gewindestift M 8 X 100 mm

LORO-X Gewindestift M 10, aus Stahl, feuerverzinkt, 60 mm lang

09602.060X
LORO-Gewindestift M 10 X 60 mm

LORO-X Gewindestift M 10, aus Stahl, feuerverzinkt, 100 mm lang

09602.100X
LORO-Gewindestift M 10 X 100 mm

LORO-X Gewindestift M 10, aus Stahl, feuerverzinkt, 120 mm lang

09602.120X
LORO-Gewindestift M 10 X 120 mm Stahl verzinkt

LORO-X Stockschraube M 8, aus Stahl, verzinkt, 100 mm lang

09603.100X
LORO-Stockschraube M 8 X 100 mm

LORO-X Stockschraube M 8, aus Stahl, verzinkt, 120 mm lang

09603.120X
LORO-Stockschraube M 8 X 120 mm

LORO-X Stockschraube M 8, aus Stahl, verzinkt, 200 mm lang

09603.200X
LORO-Stockschraube M 8 X 200 mm

LORO-X Stockschraube M 10, aus Stahl, verzinkt, 100 mm lang

09604.100X
LORO-Stockschraube M 10 X 100 mm

LORO-X Stockschraube M 10, aus Stahl, verzinkt, 120 mm lang

09604.120X
LORO-Stockschraube M 10 X 120 mm

LORO-X Stockschraube M 10, aus Stahl, verzinkt, 200 mm lang

09604.200X
LORO-Stockschraube M 10 X 200 mm

LORO-X Gewindestift M 12, aus Stahl, feuerverzinkt, 120 mm lang

09612.120X
LORO-Gewindestift M 12 X 120 mm

LORO-X Gewindestange, aus Stahl, verzinkt M 8 x 1000 mm,

09613.000X
LORO-Gewindestange M8 X 1000 mm

LORO-X Gewindestange, aus Stahl, verzinkt M 10 x 1000 mm,

09614.000X
LORO-Gewindestange M 10 X 1000 mm

LORO-X Gewindestange, aus Stahl, verzinkt M12 x 1000 mm

09615.000X
LORO-Gewindestange M 12 X 1000 mm

LORO-X Stockschraube M 12, aus Stahl, verzinkt, 100 mm lang

09622.100X
LORO-Stockschraube M 12 X 100 mm

LORO-X Stockschraube M 12, aus Stahl, verzinkt, 120 mm lang

09622.120X
LORO-Stockschraube M 12 X 120 mm

LORO-X Stockschraube M 12, aus Stahl, verzinkt, 200 mm lang

09622.200X
LORO-Stockschraube M 12 X 200 mm

LORO-X MS-Füllrohrverschluss, für Heizöl EL, für Füllstutzen 2 x 2 1/2 Zoll

09831.000X
LORO-MS-Füllrohrverschluss 2 X 2 1/2 Zoll

09861.000X
LORO-X Gleitmittel 1000-Gramm Dose

LORO-X Pellet Füll- und Entlüftung Festkupplung mit Verschlussdeckel, mit Gewinde Rp 4 Zoll aus Aluminium System Storz Typ A-110.

18354.000X
LORO-Pellet Festkupplung mit VerschlussDeckel I Gewinde 4 Zoll

LORO-X Pellet Lüftungsdeckel mit Festkupplung, aus Aluminium, inklusive Steckschloss und Kette

18355.000X
LORO-Pellet Lüftngsdeckel mit Festkupplung inklusive Steckschloss und Kette

LORO-X Pellet Füll- und Entlüftung Erdungsschelle, zur Vermeidung von statischen Aufladungen von Füll- und Entlüftungsrohren.

18357.000X
LORO-Pellet Erdungsschelle

LORO-X Sieb aus Gusseisen, 187 x 187 mm, Kl. L (1,5 t)

18615.000X
LORO-X Sieb aus Gusseisen 187 X 187 mm

LORO-X Sieb ausGusseisen, 170 x 170 mm Kl. M (12,5 t)

18616.000X
LORO-X Sieb aus Gusseisen 170 X 170 mm

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, M 8 , 80 mm lang

4.9601080C
LORO-Gewindestift M 8 X 80 mm Edelstahl

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, M 8, 100 mm lang

4.9601100C
LORO-Gewindestift M 8 X 100 mm Edelstahl

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, M 10, 80 mm lang

4.9602080C
LORO-Gewindestift M 10 X 80 mm Edelstahl

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, M 10, 100 mm lang

4.9602100C
LORO Gewindestift M 10 X 100 mm Edelstahl

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, : M 10, 120 mm lang

4.9602120C
LORO-Gewindestift M 10 X 120 mm Edelstahl

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, M 10, 150 mm lang

4.9602150C
LORO-Gewindestift M 10 X 150 mm Edelstahl

LORO-XCL Stockschrauben, aus Edelstahl 1.4301, M 8, 100 mm lang

4.9603100C
LORO-Stockschraube M 8 X 100 mm aus Edelstahl

LORO-XCL Stockschrauben, aus Edelstahl 1.4301, M 8, 120 mm lang

4.9603120C
LORO-Stockschraube M 8 X 120 mm Edelstahl

LORO-XCL Stockschrauben, aus Edelstahl 1.4301, M 10, 100 mm lang

4.9604100C
LORO-Stockschraube M 10 X 100 mm Edelstahl

LORO-XCL Stockschrauben, aus Edelstahl 1.4301, M 10, 120 mm lang

4.9604120C
LORO-Stockschraube M 10 X 120 mm Edelstahl

LORO-X Buscador rápido de desagües

Desagüe para:

TodosPetoTecho verticalBalcónTecho lateral

Profundidad de entrada:

Todos50 mm52 mm55 mm76 mm82 mm92 mm103 mm106 mm0 mm

Drenaje:

TodosEmergenciaPrincipalCombinado

Flujo:

TodosGravedadSifónico

Diámetro nominal:

TodosDN 40DN 50DN 70DN 80DN 100DN 125DN 150

Tipo de desagüe:

TodosDesagüe simpleDesagüe directoTubo doble

Propiedades:

TodosBorde de soporteCon campanaManguitoTubo-en-tubo

Brida:

TodosPetoBrida de sujeción sin bordeuna pieza, sin aislamientodos piezas, sin aislamientouna pieza, con aislamientodos piezas, con aislamientouna pieza, con aislamiento y calefaccióndos piezas, con aislamiento y calefacciónBrida de sujeción 45°Brida de sujeción 90°Brida adhesiva 45°una pieza, sin aislamientoBrida adhesiva 90°dos piezas, sin aislamientouna pieza, con aislamientodos piezas, con aislamiento

592 Resultados

LORO-X RAINSTAR siphonic parapet drain, series 88 without upstand, for main drainage with siphonic flow, discharge rate 4.4 l/s at 55 mm water level on the roof, with clamping flange, as loose and fixed flange construction, without upstand for bituminous and plastic roofing sheets, roof penetration depth 82 mm, with DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to system data sheet LX677, drain made of stainless steel, DN 40

01392.040X
Serie 49, DN 40
Brida de sujeción sin borde
Principal
Sifónico

LORO-X VARIO upstand spout with on-site bendable bonding flange, for emergency drainage with gravity flow, with variable weir height, proof of performance according to specification sheet LX1982, DN 40

15072.040X
Serie , DN 40
Peto
Emergencia
Gravedad

LORO-X Parapet rectangular emergency drain spout, for emergency drainage with gravity flow, proof of performance according to specification sheet LX2183, DN40

15196.040X
Serie 88, DN 40
Peto
Altura de vertedero 35 mm
Emergencia
Gravedad

LORO-X RAINSTAR siphonic parapet drain, series 88 without upstand, for emergency drainage with siphonic flow, discharge rate 4.5 l/s at 75 mm water level on the roof, with clamping flange, as loose and fixed flange construction, without upstand for bituminous and plastic roofing sheets, roof penetration depth 76 mm, with DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to system data sheet LX682, drain made of stainless steel, DN 40

01393.040X
Serie 88, DN 40
Brida de sujeción sin borde
Altura de vertedero 55 mm
Emergencia
Sifónico

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, without thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21511.050X
Serie 84, DN 50
una pieza, sin aislamiento
Principal
Gravedad

LORO-X DRAINLET flat roof drainage system, series 84(DL), two-piece, without thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21521.050X
Serie 84, DN 50
dos piezas, sin aislamiento
Principal
Gravedad

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, with thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21512.050X
Serie 84, DN 50
una pieza, con aislamiento
Principal
Gravedad

LORO-X DRAINLET flat roof drainage system, series 84(DL), two-piece, with thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21522.050X
Serie 84, DN 50
dos piezas, con aislamiento
Principal
Gravedad

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, with thermal insulation and heating, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21513.050X
Serie 84, DN 50
una pieza, con aislamiento y calefacción
Principal
Gravedad

LORO-X DRAINLET flat roof drainage system, series 84(DL), two-piece, with thermal insulation and heating, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21523.050X
Serie 84, DN 50
dos piezas, con aislamiento y calefacción
Principal
Gravedad

LORO-X DRAINLET-Mini, series 84(DL), one-piece, without thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 2.7 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINLET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX specification sheet LX1391, drain made of stainless steel, DN 50

21118.050X
Serie 84, DN 50
una pieza, sin aislamiento
Principal
Gravedad

LORO-X DRAINLET-Mini, series 84(DL), one-piece, without thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 2.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINLET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX specification sheet LX1641, drain made of stainless steel, DN 50

21118.050X
Serie 84, DN 50
una pieza, sin aislamiento
Principal
Gravedad

LORO-X DRAINLET-Mini, series 84(DL), one-piece, without thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 1.1 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINLET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance according to specification sheet LX1822, drain made of stainless steel, DN 50

21118.050X
Serie 84, DN 50
una pieza, sin aislamiento
Principal
Gravedad

21511.050X
Serie 84, DN 50
una pieza, sin aislamiento
Principal
Gravedad

21521.050X
Serie 84, DN 50
dos piezas, sin aislamiento
Principal
Gravedad

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, with thermal insulationg, vertical outlet, for main drainage with gravity flow, discharge rate 1.55 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance according to LX data sheet LX2292, drain made of stainless steel, DN 50

21512.050X
Serie 84, DN 50
una pieza, con aislamiento
Principal
Gravedad

21522.050X
Serie 84, DN 50
dos piezas, con aislamiento
Principal
Gravedad

21513.050X
Serie 84, DN 50
una pieza, con aislamiento y calefacción
Principal
Gravedad

21523.050X
Serie 84, DN 50
dos piezas, con aislamiento y calefacción
Principal
Gravedad

LORO-X DRAINJET flat roof drainage system, series 49(DJ), one-piece, without thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21111.050X
Serie 49, DN 50
una pieza, sin aislamiento
Principal
Sifónico

LORO-X DRAINJET flat roof drainage system, series 49(DJ), two-piece, without thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21121.050X
Serie 49, DN 50
dos piezas, sin aislamiento
Principal
Sifónico

LORO-X DRAINJET flat roof drainage system, series 49(DJ), one-piece, with thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21112.050X
Serie 49, DN 50
una pieza, con aislamiento
Principal
Sifónico

LORO-X DRAINJET flat roof drainage system, series 49(DJ), two-piece, with thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21122.050X
Serie 49, DN 50
dos piezas, con aislamiento
Principal
Sifónico

LORO-X DRAINJET flat roof drainage system, series 49(DJ), one-piece, with thermal insulation and heating, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21113.050X
Serie 49, DN 50
una pieza, con aislamiento y calefacción
Principal
Sifónico

LORO-X DRAINJET flat roof drainage system, series 49(DJ), two-piece, with thermal insulation and heating, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21123.050X
Serie 49, DN 50
dos piezas, con aislamiento y calefacción
Principal
Sifónico

LORO-X DRAINJET-Mini, series 49(DJ), one-piece, without thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 8.5 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINJET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX specification sheet LX1392, drain made of stainless steel, DN 50

21116.050X
Serie 49, DN 50
una pieza, sin aislamiento
Principal
Sifónico

LORO-X DRAINJET-Mini, series 49(DJ), one-piece, without thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 5.5 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINJET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX specification sheet LX1490, drain made of stainless steel, DN 50

21116.050X
Serie 49, DN 50
una pieza, sin aislamiento
Principal
Sifónico

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, without thermal insulation, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1385, drain made of stainless steel, DN 50

21711.050X
Serie 84, DN 50
una pieza, sin aislamiento
Altura de vertedero 35 mm
Emergencia
Gravedad

LORO-X DRAINLET flat roof drainage system, series 84(DL), two-piece, without thermal insulation, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1385, drain made of stainless steel, DN 50

21721.050X
Serie 84, DN 50
dos piezas, sin aislamiento
Altura de vertedero 35 mm
Emergencia
Gravedad

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, with thermal insulation, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1385, drain made of stainless steel, DN 50

21712.050X
Serie 84, DN 50
una pieza, con aislamiento
Altura de vertedero 35 mm
Emergencia
Gravedad

LORO-X DRAINLET flat roof drainage system, series 84(DL), two-piece, with thermal insulation, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1385, drain made of stainless steel, DN 50

21722.050X
Serie 84, DN 50
dos piezas, con aislamiento
Altura de vertedero 35 mm
Emergencia
Gravedad

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, with thermal insulation and heating, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1385, drain made of stainless steel, DN 50

21713.050X
Serie 84, DN 50
una pieza, con aislamiento y calefacción
Altura de vertedero 35 mm
Emergencia
Gravedad

21723.050X
Serie 84, DN 50
dos piezas, con aislamiento y calefacción
Altura de vertedero 35 mm
Emergencia
Gravedad

LORO-X DRAINLET-Mini, series 84(DL), one-piece, without thermal insulation, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINLET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX specification sheet LX1393, drain made of stainless steel, DN 50

21119.050X
Serie 84, DN 50
una pieza, sin aislamiento
Altura de vertedero 40 mm
Emergencia
Gravedad

21711.050X
Serie 84, DN 50
una pieza, sin aislamiento
Altura de vertedero 35 mm
Emergencia
Gravedad

21721.050X
Serie 84, DN 50
dos piezas, sin aislamiento
Altura de vertedero 35 mm
Emergencia
Gravedad

21712.050X
Serie 84, DN 50
una pieza, con aislamiento
Altura de vertedero 35 mm
Emergencia
Gravedad

21722.050X
Serie 84, DN 50
dos piezas, con aislamiento
Altura de vertedero 35 mm
Emergencia
Gravedad