LORO-X Base de données produits en ligne

Recherche d'articles

N° d'article, mot-clé, EAN

Recherche rapide évacuations

Drainage:, Diamètre nominal, Débit:

Recherche rapide tuyaux

DN, Longueur/Degré, Groupe de produits

Articles

1 sur 1 résultats affichés

15196.100XLORO-X RECHTECKSPEIER, 300 MM,DN 100DN 100 · 1,70 Kg · WG 9 · Edelstahl›

Article: 15196.100X – LORO-X RECHTECKSPEIER, 300 MM,DN 100

LORO-X rectangular drain 300 mm DN 100

Description

LORO-X Parapet rectangular emergency drain spout, for emergency drainage with gravity flow, replacement for article number 15198.100X, proof of performance according to specification sheet LX1881, made of stainless steel, DN100

Prix export LORO: 179,40 €
Code EAN: 4038088105719
Classe ETIM: EC010565
Diamètre nominal: DN 100
Longueur/degré nominal: 300
Dimensions extérieures (HxLxP): 120 x 120 x 390 mm
Poids: 1,70 Kg (STK)
Groupe de produits: 9
Numéro tarifaire douanier: 73072980
Produktfinder/Serie: Link
Matériau / Couleur: Edelstahl, Silber

Note d'utilisation

LORO-X Rechteck-Speier fügen sich optimal in die Optik von eckigen Fassadenelementen (wie z.B. Klinker) ein. Auf Anfrage können Höhe und Breite des Speiers objektbezogen angepasst werden. Die Querschnittsfläche des eckigen Auslaufes entspricht mindestens dem Querschnitt des runden Anschlussrohres, sodass der freie Abfluss nicht behindert wird. Die Abtropfkante des Rechteck-Speiers sollte aus der Fassade herausstehen, um ein Herunterlaufen von Restwasser an der Fassade zu verringern.

Retour sur cet article

Fiche technique du produit (PDF)
YouTube videos
DXF

CAD 2D (DXF)
DWG

CAD 3D (DWG)
STP

BIM 3D (stp)
3D Vue 3D
IFC

BIM 3D (ifc3)
PDF

Dessin dimensionnel (PDF)
PDF

Notice d'installation (PDF)
PDF

Fiche technique du système LX 1881

Articles complémentaires

Systèmes complets LX

Système complet LX 1881-20Xsans tuyau de descente›

Système complet LX 1881-20X –

Description

LORO-X Parapet rectangular emergency drain spout, for emergency drainage with gravity flow, proof of performance according to specification sheet LX1881, DN100

Liste des pièces – Fiche technique du système LX1881-20X

1×	01371.100X	LORO-X RAINSTAR SCUPPER EMERGENCY DRAIN WITH CLAMPING FLANGE, SERIE RB, FOR BITUMINOUS ROOFING SHEETS DN 100
1×	15196.100X	LORO-X RECHTECKSPEIER, 300 MM,DN 100
1×	01384.000X	LORO-WÄRMEDÄMMBLOCK
1×	01401.100X	LORO-X PIPE WITH 1 SOCKET 250 MM DN 100
1×	00911.100X	LORO-X SEALING ELEMENT SBR DN 100
1×	00986.000X	LORO-X LUBRICANT 250 G TUBE
1×	13235.100X	LORO-X SLIDING FLANGE WITH PRE-INSTALLED CONNECTION SLEEVE FOR VAPOR BARRIER WITH BITUMINOUS ROOFING SHEETS DN 100

Système complet LX:

LX1881-20X

Fiche technique du système LX 1881
DWG

System CAD
PDF

Dessin coté (PDF)
PDF

Courbe de décharge (PDF)

Recherche plein texte dans les pages web et PDFs:

PDFs

LIEFERPROGRAMM.pdf
STAHLABFLUSSROHRE_ENG.pdf
STAHLABFLUSSROHRE.pdf
ZERT_BAUPVO_EN_1123_ENG.pdf
ZERT_BAUPVO_EN_1123.pdf
LORO_ROHRPROGRAMM.pdf
LX_PROSP_GESAMT_FR.pdf

Articles recherchés récemment:

LORO-X Recherche rapide tuyaux et raccords

Name: LORO-X RECHTECKSPEIER, 300 MM,DN 100
Brand: LORO-X
SKU: 15196.100X
Price: 179.40 EUR
Availability: InStock

Groupe de produits:

TousTuyau d'évacuation en acierDauphinTuyau compositeTuyau/RaccordÉtanchéitéPièces spécialesAccessoires

Diamètre nominal:

TousDN 0DN 32DN 40DN 50DN 70DN 80DN 100DN 125DN 150DN 168DN 200DN 250DN 300

Longueur/Degré:

Tousnon indiqué15°30°45°70°87°88°90°150 mm170 mm250 mm350 mm400 mm500 mm750 mm1000 mm1500 mm2000 mm2500 mm2750 mm2950 mm3000 mm4000 mm5000 mm6000 mm

2091 Résultats

LORO-X Wandeinbaukasten, aus Edelstahl, verzinktem Stahlblech, mit Füllstutzen DN 50 einschl. Füllrohrverschluss mit Bajonetverschluss, mit Bohrung zur Aufnahme des Grenzwertgeber-Anschlusssteckers, mit Kabelschutzrohr für Elektrokabel, mit verschließbarer Tür (Vierkant-Steckschlüssel), mit Schrauben, Bolzen, und Laschen zum Einspannen ins Mauerwerk, mit Maueranschlussdichtung am Rahmen, DN 50

00741.050X
LORO-X Wandeinbaukasten aus Edelstahl mit Füllstutzen DN 50

00985.000X
LORO-X Kleber (125 ccm)

00986.000X
LORO-X Gleitmittel 250-Gramm Tube

LORO-X Hakenschlüssel für Balkonabläufe Serie J

09068.000X
LORO-X Hakenschlüssel Balkonablauf SERIE J

LORO-X Gewindestift M 8, aus Stahl, feuerverzinkt, 60 mm lang

09601.060X
LORO-Gewindestift M 8 X 60 mm

LORO-X Gewindestift M 8, aus Stahl, feuerverzinkt, 80 mm lang

09601.080X
LORO-Gewindestift M 8 X 80 mm

LORO-X Gewindestift M 8, aus Stahl, feuerverzinkt, 100 mm lang

09601.100X
LORO-Gewindestift M 8 X 100 mm

LORO-X Gewindestift M 10, aus Stahl, feuerverzinkt, 60 mm lang

09602.060X
LORO-Gewindestift M 10 X 60 mm

LORO-X Gewindestift M 10, aus Stahl, feuerverzinkt, 100 mm lang

09602.100X
LORO-Gewindestift M 10 X 100 mm

LORO-X Gewindestift M 10, aus Stahl, feuerverzinkt, 120 mm lang

09602.120X
LORO-Gewindestift M 10 X 120 mm Stahl verzinkt

LORO-X Stockschraube M 8, aus Stahl, verzinkt, 100 mm lang

09603.100X
LORO-Stockschraube M 8 X 100 mm

LORO-X Stockschraube M 8, aus Stahl, verzinkt, 120 mm lang

09603.120X
LORO-Stockschraube M 8 X 120 mm

LORO-X Stockschraube M 8, aus Stahl, verzinkt, 200 mm lang

09603.200X
LORO-Stockschraube M 8 X 200 mm

LORO-X Stockschraube M 10, aus Stahl, verzinkt, 100 mm lang

09604.100X
LORO-Stockschraube M 10 X 100 mm

LORO-X Stockschraube M 10, aus Stahl, verzinkt, 120 mm lang

09604.120X
LORO-Stockschraube M 10 X 120 mm

LORO-X Stockschraube M 10, aus Stahl, verzinkt, 200 mm lang

09604.200X
LORO-Stockschraube M 10 X 200 mm

LORO-X Gewindestift M 12, aus Stahl, feuerverzinkt, 120 mm lang

09612.120X
LORO-Gewindestift M 12 X 120 mm

LORO-X Gewindestange, aus Stahl, verzinkt M 8 x 1000 mm,

09613.000X
LORO-Gewindestange M8 X 1000 mm

LORO-X Gewindestange, aus Stahl, verzinkt M 10 x 1000 mm,

09614.000X
LORO-Gewindestange M 10 X 1000 mm

LORO-X Gewindestange, aus Stahl, verzinkt M12 x 1000 mm

09615.000X
LORO-Gewindestange M 12 X 1000 mm

LORO-X Stockschraube M 12, aus Stahl, verzinkt, 100 mm lang

09622.100X
LORO-Stockschraube M 12 X 100 mm

LORO-X Stockschraube M 12, aus Stahl, verzinkt, 120 mm lang

09622.120X
LORO-Stockschraube M 12 X 120 mm

LORO-X Stockschraube M 12, aus Stahl, verzinkt, 200 mm lang

09622.200X
LORO-Stockschraube M 12 X 200 mm

LORO-X MS-Füllrohrverschluss, für Heizöl EL, für Füllstutzen 2 x 2 1/2 Zoll

09831.000X
LORO-MS-Füllrohrverschluss 2 X 2 1/2 Zoll

09861.000X
LORO-X Gleitmittel 1000-Gramm Dose

LORO-X Pellet Füll- und Entlüftung Festkupplung mit Verschlussdeckel, mit Gewinde Rp 4 Zoll aus Aluminium System Storz Typ A-110.

18354.000X
LORO-Pellet Festkupplung mit VerschlussDeckel I Gewinde 4 Zoll

LORO-X Pellet Lüftungsdeckel mit Festkupplung, aus Aluminium, inklusive Steckschloss und Kette

18355.000X
LORO-Pellet Lüftngsdeckel mit Festkupplung inklusive Steckschloss und Kette

LORO-X Pellet Füll- und Entlüftung Erdungsschelle, zur Vermeidung von statischen Aufladungen von Füll- und Entlüftungsrohren.

18357.000X
LORO-Pellet Erdungsschelle

LORO-X Sieb aus Gusseisen, 187 x 187 mm, Kl. L (1,5 t)

18615.000X
LORO-X Sieb aus Gusseisen 187 X 187 mm

LORO-X Sieb ausGusseisen, 170 x 170 mm Kl. M (12,5 t)

18616.000X
LORO-X Sieb aus Gusseisen 170 X 170 mm

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, M 8 , 80 mm lang

4.9601080C
LORO-Gewindestift M 8 X 80 mm Edelstahl

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, M 8, 100 mm lang

4.9601100C
LORO-Gewindestift M 8 X 100 mm Edelstahl

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, M 10, 80 mm lang

4.9602080C
LORO-Gewindestift M 10 X 80 mm Edelstahl

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, M 10, 100 mm lang

4.9602100C
LORO Gewindestift M 10 X 100 mm Edelstahl

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, : M 10, 120 mm lang

4.9602120C
LORO-Gewindestift M 10 X 120 mm Edelstahl

LORO-XCL Gewindestifte, aus Edelstahl 1.4301, M 10, 150 mm lang

4.9602150C
LORO-Gewindestift M 10 X 150 mm Edelstahl

LORO-XCL Stockschrauben, aus Edelstahl 1.4301, M 8, 100 mm lang

4.9603100C
LORO-Stockschraube M 8 X 100 mm aus Edelstahl

LORO-XCL Stockschrauben, aus Edelstahl 1.4301, M 8, 120 mm lang

4.9603120C
LORO-Stockschraube M 8 X 120 mm Edelstahl

LORO-XCL Stockschrauben, aus Edelstahl 1.4301, M 10, 100 mm lang

4.9604100C
LORO-Stockschraube M 10 X 100 mm Edelstahl

LORO-XCL Stockschrauben, aus Edelstahl 1.4301, M 10, 120 mm lang

4.9604120C
LORO-Stockschraube M 10 X 120 mm Edelstahl

LORO-X Recherche rapide évacuations

Évacuation pour:

TousAcrotèreToit verticalBalconToit latéral

Profondeur entrée:

Tous50 mm52 mm55 mm76 mm82 mm92 mm103 mm106 mm0 mm

Drainage:

TousUrgencePrincipalCombiné

Débit:

TousGravitaireSiphoïde

Diamètre nominal:

TousDN 40DN 50DN 70DN 80DN 100DN 125DN 150

Type évacuation:

TousÉvacuation simpleÉvacuation directeDouble tuyau

Propriétés:

TousRebord de supportAvec clocheManchonTuyau-dans-tuyau

Bride:

TousAcrotèreBride à serrage sans rebordmonobloc, sans isolationen deux parties, sans isolationmonobloc, avec isolationen deux parties, avec isolationmonobloc, avec isolation et chauffageen deux parties, avec isolation et chauffageBride à serrage 45°Bride à serrage 90°Bride collée 45°monobloc, sans isolationBride collée 90°en deux parties, sans isolationmonobloc, avec isolationen deux parties, avec isolation

592 Résultats

LORO-X RAINSTAR siphonic parapet drain, series 88 without upstand, for main drainage with siphonic flow, discharge rate 4.4 l/s at 55 mm water level on the roof, with clamping flange, as loose and fixed flange construction, without upstand for bituminous and plastic roofing sheets, roof penetration depth 82 mm, with DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to system data sheet LX677, drain made of stainless steel, DN 40

01392.040X
Série 49, DN 40
Bride à serrage sans rebord
Principal
Siphoïde

LORO-X VARIO upstand spout with on-site bendable bonding flange, for emergency drainage with gravity flow, with variable weir height, proof of performance according to specification sheet LX1982, DN 40

15072.040X
Série , DN 40
Acrotère
Urgence
Gravitaire

LORO-X Parapet rectangular emergency drain spout, for emergency drainage with gravity flow, proof of performance according to specification sheet LX2183, DN40

15196.040X
Série 88, DN 40
Acrotère
Hauteur de déversoir 35 mm
Urgence
Gravitaire

LORO-X RAINSTAR siphonic parapet drain, series 88 without upstand, for emergency drainage with siphonic flow, discharge rate 4.5 l/s at 75 mm water level on the roof, with clamping flange, as loose and fixed flange construction, without upstand for bituminous and plastic roofing sheets, roof penetration depth 76 mm, with DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to system data sheet LX682, drain made of stainless steel, DN 40

01393.040X
Série 88, DN 40
Bride à serrage sans rebord
Hauteur de déversoir 55 mm
Urgence
Siphoïde

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, without thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21511.050X
Série 84, DN 50
monobloc, sans isolation
Principal
Gravitaire

LORO-X DRAINLET flat roof drainage system, series 84(DL), two-piece, without thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21521.050X
Série 84, DN 50
en deux parties, sans isolation
Principal
Gravitaire

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, with thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21512.050X
Série 84, DN 50
monobloc, avec isolation
Principal
Gravitaire

LORO-X DRAINLET flat roof drainage system, series 84(DL), two-piece, with thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21522.050X
Série 84, DN 50
en deux parties, avec isolation
Principal
Gravitaire

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, with thermal insulation and heating, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21513.050X
Série 84, DN 50
monobloc, avec isolation et chauffage
Principal
Gravitaire

LORO-X DRAINLET flat roof drainage system, series 84(DL), two-piece, with thermal insulation and heating, vertical outlet, for main drainage with gravity flow, discharge rate 5.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1384, drain made of stainless steel, DN 50

21523.050X
Série 84, DN 50
en deux parties, avec isolation et chauffage
Principal
Gravitaire

LORO-X DRAINLET-Mini, series 84(DL), one-piece, without thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 2.7 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINLET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX specification sheet LX1391, drain made of stainless steel, DN 50

21118.050X
Série 84, DN 50
monobloc, sans isolation
Principal
Gravitaire

LORO-X DRAINLET-Mini, series 84(DL), one-piece, without thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 2.4 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINLET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX specification sheet LX1641, drain made of stainless steel, DN 50

21118.050X
Série 84, DN 50
monobloc, sans isolation
Principal
Gravitaire

LORO-X DRAINLET-Mini, series 84(DL), one-piece, without thermal insulation, vertical outlet, for main drainage with gravity flow, discharge rate 1.1 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINLET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance according to specification sheet LX1822, drain made of stainless steel, DN 50

21118.050X
Série 84, DN 50
monobloc, sans isolation
Principal
Gravitaire

21511.050X
Série 84, DN 50
monobloc, sans isolation
Principal
Gravitaire

21521.050X
Série 84, DN 50
en deux parties, sans isolation
Principal
Gravitaire

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, with thermal insulationg, vertical outlet, for main drainage with gravity flow, discharge rate 1.55 l/s at 35 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance according to LX data sheet LX2292, drain made of stainless steel, DN 50

21512.050X
Série 84, DN 50
monobloc, avec isolation
Principal
Gravitaire

21522.050X
Série 84, DN 50
en deux parties, avec isolation
Principal
Gravitaire

21513.050X
Série 84, DN 50
monobloc, avec isolation et chauffage
Principal
Gravitaire

21523.050X
Série 84, DN 50
en deux parties, avec isolation et chauffage
Principal
Gravitaire

LORO-X DRAINJET flat roof drainage system, series 49(DJ), one-piece, without thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21111.050X
Série 49, DN 50
monobloc, sans isolation
Principal
Siphoïde

LORO-X DRAINJET flat roof drainage system, series 49(DJ), two-piece, without thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21121.050X
Série 49, DN 50
en deux parties, sans isolation
Principal
Siphoïde

LORO-X DRAINJET flat roof drainage system, series 49(DJ), one-piece, with thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21112.050X
Série 49, DN 50
monobloc, avec isolation
Principal
Siphoïde

LORO-X DRAINJET flat roof drainage system, series 49(DJ), two-piece, with thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21122.050X
Série 49, DN 50
en deux parties, avec isolation
Principal
Siphoïde

LORO-X DRAINJET flat roof drainage system, series 49(DJ), one-piece, with thermal insulation and heating, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21113.050X
Série 49, DN 50
monobloc, avec isolation et chauffage
Principal
Siphoïde

LORO-X DRAINJET flat roof drainage system, series 49(DJ), two-piece, with thermal insulation and heating, vertical outlet, for main drainage with siphonic flow, discharge rate 9.0 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINJET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1175, drain made of stainless steel, DN 50

21123.050X
Série 49, DN 50
en deux parties, avec isolation et chauffage
Principal
Siphoïde

LORO-X DRAINJET-Mini, series 49(DJ), one-piece, without thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 8.5 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINJET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX specification sheet LX1392, drain made of stainless steel, DN 50

21116.050X
Série 49, DN 50
monobloc, sans isolation
Principal
Siphoïde

LORO-X DRAINJET-Mini, series 49(DJ), one-piece, without thermal insulation, vertical outlet, for main drainage with siphonic flow, discharge rate 5.5 l/s at 55 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINJET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX specification sheet LX1490, drain made of stainless steel, DN 50

21116.050X
Série 49, DN 50
monobloc, sans isolation
Principal
Siphoïde

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, without thermal insulation, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1385, drain made of stainless steel, DN 50

21711.050X
Série 84, DN 50
monobloc, sans isolation
Hauteur de déversoir 35 mm
Urgence
Gravitaire

LORO-X DRAINLET flat roof drainage system, series 84(DL), two-piece, without thermal insulation, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1385, drain made of stainless steel, DN 50

21721.050X
Série 84, DN 50
en deux parties, sans isolation
Hauteur de déversoir 35 mm
Urgence
Gravitaire

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, with thermal insulation, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1385, drain made of stainless steel, DN 50

21712.050X
Série 84, DN 50
monobloc, avec isolation
Hauteur de déversoir 35 mm
Urgence
Gravitaire

LORO-X DRAINLET flat roof drainage system, series 84(DL), two-piece, with thermal insulation, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1385, drain made of stainless steel, DN 50

21722.050X
Série 84, DN 50
en deux parties, avec isolation
Hauteur de déversoir 35 mm
Urgence
Gravitaire

LORO-X DRAINLET flat roof drainage system, series 84(DL), one-piece, with thermal insulation and heating, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, for bituminous and plastic roofing sheets, DRAINLET hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX data sheet LX1385, drain made of stainless steel, DN 50

21713.050X
Série 84, DN 50
monobloc, avec isolation et chauffage
Hauteur de déversoir 35 mm
Urgence
Gravitaire

21723.050X
Série 84, DN 50
en deux parties, avec isolation et chauffage
Hauteur de déversoir 35 mm
Urgence
Gravitaire

LORO-X DRAINLET-Mini, series 84(DL), one-piece, without thermal insulation, vertical outlet, for emergency drainage with gravity flow, discharge rate 7.5 l/s at 75 mm water level on the roof, with clamping flange as loose and fixed flange construction including compression seals, DRAINLET-Mini hood made of stainless steel, according to DIN EN 1253, proof of performance with standard-compliant testing system with 4.2 m non-ventilated downpipe according to LX specification sheet LX1393, drain made of stainless steel, DN 50

21119.050X
Série 84, DN 50
monobloc, sans isolation
Hauteur de déversoir 40 mm
Urgence
Gravitaire

21711.050X
Série 84, DN 50
monobloc, sans isolation
Hauteur de déversoir 35 mm
Urgence
Gravitaire

21721.050X
Série 84, DN 50
en deux parties, sans isolation
Hauteur de déversoir 35 mm
Urgence
Gravitaire

21712.050X
Série 84, DN 50
monobloc, avec isolation
Hauteur de déversoir 35 mm
Urgence
Gravitaire

21722.050X
Série 84, DN 50
en deux parties, avec isolation
Hauteur de déversoir 35 mm
Urgence
Gravitaire

Glisser = pivoter · Molette/deux doigts = zoom · Droit/deux doigts = déplacer

–

Muffe (Anschluss-Port)

Spitzende (Anschluss-Port)

Rohrkörper (Sweep)

Ziehen = drehen · Rad/Zwei-Finger = zoomen · Rechts/Zwei-Finger = verschieben

LORO-X Base de données produits en ligne

Articles

Articles complémentaires

Systèmes complets LX

Liste des pièces – Fiche technique du système LX1881-20X

Recherche plein texte dans les pages web et PDFs:

Pages

PDFs

Articles recherchés récemment:

LORO-X Recherche rapide tuyaux et raccords

LORO-X Recherche rapide évacuations